Position
Control unit
Floating position
Locked position
Folding
Position of control units during transport travel
Parking
The machine must be parked unfolded in a hall
or under a roof.
WARNING
Risk of accident due to insufficient stability
¾
Park the machine only while unfolded.
¾
Park the machine on a flat, paved surface.
1. Position the machine at a suitable location
and set the tractor brake.
2. Lower the machine onto the coulter and tooth
packer/rotor.
3.
Lock the control units and switch off the
PTO-shaft.
4. Disconnect hydraulic lines, electric connec-
tions and ISOBUS connection and store in
hose compartment.
5. Relieve and uncouple the upper link.
6. Uncouple the tractor link arm and lower it.
7. Uncouple the propshaft and lay it into the
holder. Swivel the propshaft holder toward
the centre:
8. Move the tractor approx. 20 cm forward and
secure it.
9. Depressurise the hydraulic lines, unplug and
store them in the hose compartment.
10. Unplug ISOBUS and lighting and store them
in the hose compartment.
Attach the cover
caps if so equipped.
11. Remove the hose assembly from the front
implement.
NOTE
Clean the machine and prepare properly before
parking it for an extended period; see chapter
Care and Maintenance.
32