Power harrow
Adjusting the working depth of
the power harrow
The depth setting must be made in due con-
sideration of the prevailing soil conditions, the
desired degree of mixing and wear on the tines.
1
The bolts (1) on the hole patterns limit the work-
ing depth of the power harrow.
The working depth can be adjusted in 10 steps.
The working depth increases from
T
(Transport
position)
, 1, 2
, ... to level
10
by approx. 2 cm each.
¾
Switch off the PTO-shaft.
¾
Lift the machine with the three-point hydrau-
lics so that the packer rotates freely.
¾
Secure the tractor against rolling away, secure
the control units.
¾
Insert the bolts (1) on all hole patterns in the
same level.
¾
Secure the bolts with a cotter pin at the inside.
¾
Adjust the heights of the deflector rail and the
side plate.
¾
Check the working depth during use in the
field.
36