HORNER EXL6 OCS, Руководство пользователя

Страница: 58 / 191

MAN1032-10-EN_EXL6_UserManual
March 12, 2020 58 | 191
6.3 Register Map for EXL6 OCS I/O
Table 6.4 – I/O Register Map
Registers
Description
EXL6 with
no I/O
EXL6 with
102 I/O
EXL6 with
103 I/O
EXL6 with
104 I/O
EXL6 with
105 I/O
EXL6 with
106 I/O
%I1-%I12 Unused Digital Inputs
%I13-%I16 Unused Reserved Digital Inputs Reserved
%I17-%I24 Unused Reserved Digital Inputs Reserved
%I25-%I29 Unused Reserved
%I30-%I31 Unused PWM Table (Below)
%I32 Unused ESCP Alarm*
%Q1 Unused PWM Table (Below)
%Q1-%Q6 Unused Digital Outputs
%Q7-%Q12 Unused Reserved Digital Outputs
%Q13-%Q16 Unused Reserved
Digital
Outputs Reserved
%Q17-%Q20 Unused HSC Table (Below)
%Q21-%Q24 Unused Reserved
%AI1-%AI2 Unused HSC Table (Below)
%AI33 - %AI38 Unused
Analog
Inputs
%AQ1-%AQ8 Unused PWM Table (Below)
%AQ9-%AQ10 Unused Analog Outputs
Unused = These registers can be used as general purpose registers
*Electronic Short Circuit Protection [ESCP]
NOTE: The ESCP bit is set high when the output current is too high, and the output driver has
shut down for thermal protection. This typically happens when outputs are shorted, or they
are driving loads that are higher than the output rating.