Horizon Fitness PF-P3100 Скачать руководство пользователя

Страница: 31 / 57

Troubleshooting

If there are frequent misfeeds:

The problem occurs because the sheets are not loaded in the feed tray properly.

The problem occurs even though the sheets are properly loaded in the feed tray.

Misfeed happens after cleaning of the feed roller.

Check Points

Causes and Remedies

Page

Check whether the
sheets are properly
loaded in the feed tray.

- The sheets must be loaded in the feed tray

properly.

Check Points

Causes and Remedies

Page

The sheets being used
are too thin or too thick.

- Only use sheets which are within the

specification. Do not fold NCR paper,
heavy paper (more than 127 gsm, 34#
bond, or 85# book), or coated paper.

Check that the feed
roller assembly is
attached properly.

- Make sure that the both ends of the feed

roller shaft are attached properly.

Check whether the
feed table adjusting
lever is properly set.

- The feed table pressure is too weak.

- If the pressure is set to Normal, change the

setting to Strong.

Set the double feed stop
plate pressure properly.

- Set the double feed stop plate pressure

properly.

- If the pressure is set to Normal, change the

setting to Weak.

Check whether the
feed roller is stained
with ink.

- Clean the feed roller with a cloth.

Check Points

Causes and Remedies

Page

Check whether the
feed roller is worn out.

- R

eplace the fold rollers with new one.

- Replacement recommendation is after 15 to

30 million folds. (Depending on sheet type.)

- When the folder is not used for 1 year, the

feed roller may be deteriorated. Replace the
feed roller with new one when feeding
performance is not satisfactory.

23056

0201

23056

0201

Within specifications

23056

0203

23056

0203

Strong

23056

0203

Weak

23056

0203

Cleaning

23056

0201

Check

Содержание PF-P3100


























































Результаты поиска

Содержание PF-P3100

Отзывы:

Похожие инструкции для PF-P3100

Бренды по названию

Популярные бренды

Horizon Fitness PF-P3100, Руководство пользователя

Результаты поиска

Содержание PF-P3100

Отзывы:

Похожие инструкции для PF-P3100

Бренды по названию

Популярные бренды