Horizon Fitness PF-P3100 Скачать руководство пользователя

Страница: 3 / 57

- Horizon International Inc. cannot anticipate every possible situation that might involve a

potential hazard. The instructions in this manual and warning labels on the machine are

therefore not all inclusive.

- All equipment shall be locked out or tagged out to protect against accidental or inadvert-

ent operation when such operation could cause injury to personnel. Do not attempt to

operate any switch, valve, or other energy isolating device where it is locked or tagged out.

- Do not operate the machines when any covers are removed.

- Some of the drawings in this manual show the machine uncovered for explaining the
detail or inside of machine.

Safety Precautions

Safety precautions are indicated in this manual as follows:

The term WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.

The term CAUTION indicates a potentially hazardous situation which, if not
avoided, may result in serious injury, or damage to the machine.

This symbol indicates a note which includes important information. Follow the
note to operate the machine safely.

This symbol indicates a prohibited action. Do not perform any prohibited action.

This symbol indicates an essential procedure. Follow the procedure to operate
the machine safely.

Important

• This lists the range of acceptable values and operating

conditions.

Attention

• This information will help you to avoid problems with the

machine or help you learn how to operate the machine.

Note

• Refer to this note when you operate the machine.

Additional
Information

• This explains a mechanism in the machine.

Содержание PF-P3100


























































Результаты поиска

Содержание PF-P3100

Отзывы:

Похожие инструкции для PF-P3100

Бренды по названию

Популярные бренды

Horizon Fitness PF-P3100, Руководство пользователя

Результаты поиска

Содержание PF-P3100

Отзывы:

Похожие инструкции для PF-P3100

Бренды по названию

Популярные бренды