horiba LAQUA-PC1500 Скачать руководство пользователя страница 9

Страница: 9 / 100

For Your Safety

VII

■ For Your Safety

• Hazard classification and warning symbols

Warning messages are described in the following manner. Read the messages and follow the

instructions carefully.

• Hazard classification

• Warning symbols

This indicates an imminently hazardous situation which, if not

avoided, will result in death or serious injury. This is to be

limited to the most extreme situations.

This indicates a potentially hazardous situation which, if not

avoided, could result in death or serious injury.

This indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury. It may also

be used to alert against unsafe practices.

Description of what should be done, or what should be

followed.

Description of what should never be done, or what is

prohibited.

Содержание LAQUA-PC1500





































































































Результаты поиска

Содержание LAQUA-PC1500

Отзывы:

Бренды по названию

Популярные бренды

horiba LAQUA-PC1500, Инструкция по эксплуатации

Результаты поиска

Содержание LAQUA-PC1500

Отзывы:

Бренды по названию

Популярные бренды