horiba LAQUA-PC1500 Скачать руководство пользователя страница 3

Страница: 3 / 100

CODE:3200901770-GZ0000638478

■ Preface

This manual describes the operation of the following instrument.

Be sure to read this manual before using the product to ensure proper and safe operation of

the product. Also, safely store the manual so, it is readily available whenever necessary.

Product specifications and appearance, as well as the contents of this manual are subject to

change without notice.

• Warranty and responsibility

HORIBA Advanced Techno Co., Ltd. warrants that the product shall be free from defects in

material and workmanship and agrees to repair or replace free of charge, at option of HORIBA

Advanced Techno Co., Ltd., any malfunctioned or damaged product attributable to

responsibility of HORIBA Advanced Techno Co., Ltd. for a period of Three (3) years from the

delivery unless otherwise agreed in a written statement. In any one of the following cases,

none of the warranties set forth herein shall be extended:

• Any malfunction or damage attributable to improper operation

• Any malfunction attributable to repair or modification by any person not authorized by

HORIBA Advanced Techno Co., Ltd.

• Any malfunction or damage attributable to the use in an environment not specified in this

manual

• Any malfunction or damage attributable to violation of the instructions in this manual or

operations in the manner not specified in this manual

• Any malfunction or damage attributable to any cause or causes beyond the reasonable

control of HORIBA Advanced Techno Co., Ltd. such as natural disasters

• Any deterioration in appearance attributable to corrosion, rust and so on

• Replacement of consumables

HORIBA Advanced Techno Co., Ltd. SHALL NOT BE LIABLE FOR ANY DAMAGES

RESULTING FROM ANY MALFUNCTIONS OF THE PRODUCT, ANY ERASURE OF DATA,

OR ANY OTHER USES OF THE PRODUCT.

• Trademarks

• Microsoft, Windows, Windows Vista are registered trademarks or trademarks of Microsoft

Corporation in the United States and other countries.

• Other company names and brand names are either registered trademarks or trademarks of

the respective companies. (R), (TM) symbols may be omitted in this manual.

Brand:

LAQUA

Series name:

LAQUA 1500 Series Benchtop Water Quality Meters

Model:

LAQUA-PC1500

Model description:

pH/ORP/Conductivity Benchtop Meter

Содержание LAQUA-PC1500





































































































Результаты поиска

Содержание LAQUA-PC1500

Отзывы:

Бренды по названию

Популярные бренды

horiba LAQUA-PC1500, Инструкция по эксплуатации

Результаты поиска

Содержание LAQUA-PC1500

Отзывы:

Бренды по названию

Популярные бренды