32
5 Memory display
Calculating and storing an average value
Note
• Calculating the average value deletes the measured data
from the IG-340 main unit.
• With this operation, the held measurement value is released,
and the MAX value is deleted.
Tip
If both average data and measured data are stored, the
average data (from AVG No.001) followed by the measured
data (from No.001) is stored.
1.
Press the [AVG] button.
• If three pieces or more of
measured data are stored in
the IG-340 main unit, an
average value obtained
excluding the maximum value
and minimum value is stored
in the IG-340 main unit as
average data together with an
AVG No.
• If two pieces or less of measured data are stored, an
average value is stored in the IG-340 main unit as
average data together with an AVG No.
• Up to 200 pieces of average data can be stored.
• The stored average data can be viewed or deleted on
the memory display (refer to "Viewing stored data"
(page 31)).
