24
4 How to use
• When the value is 100.1 or more and 199.9 or less:
[OVER] at the bottom right of the display lights up.
• When the value is 200.0 or more:
“199.9” blinks at the glossiness display position, and [OVER]
at the bottom right of the display blinks.
When the auto power OFF is enabled (refer to page 40), the
power turns OFF in the following cases.
• When no operation is performed for 10 minutes or more
• When there is no change in the measurement values beyond
the range of glossiness
0.5 on the measurement display
Perform calibration using the standard plate supplied with
the protective cover.
• If calibration is performed using an object other than the
standard plate, the accuracy of measurement values cannot
be guaranteed.
Tip
• A measurement value is updated every 0.5 seconds. It also
can be held. For holding of the measurement value, refer to
"Holding a measurement value" (page 25).
• Pressing the [CLEAR] button in the MAX mode deletes the
MAX value.
The MAX value is also deleted in the following cases.
• When the power is turned OFF
• When the [DATA IN/MEAS] button or the side button is
pressed
• When the [AVG] button is pressed
• When the [DATA] button or the [SET/
] button is
pressed
