22
4 How to use
Standard value check
1.
Read the value (measurement value) displayed at the
glossiness position.
If the measurement value deviates from the glossiness of
the standard plate, perform calibration (refer to page 28).
Tip
The calibration value is printed next to the standard plate in the
protective cover.
Measurement
1.
Remove the protective cover, and bring the
measurement area of the IG-340 main unit into close
contact with the measurement target surface.
The measurement value is displayed.
Fig. 8 Measurement
2.
Hold or store the measurement value, or calculate
and store the average data as needed (refer to page
25 to page 27).
