Horiba Scientific LAQUAact D-75G, Инструкция по эксплуатации

Страница: 81 / 118

Using the automatic data save (default: OFF)
59
4. Press the key to enter the measurement mode.
When this setting is "ON", "AUTO LOG", which indicates that the automatic data save
function is on, is displayed.
5. Pressing the key starts saving the data (when the setting is "ON").
Pressing the key again stops the data saving process. During automatic data
saving measurement, data is displayed for one second each time a measurement
takes place. When more than 1000 data items are saved, "ERR No. 0010" is
displayed and data saving is stopped. When you delete the data, the error is cleared (“
Deleting all saved data ” (page 46)).
When data is
saved
key