hopf Elektronik GmbH 8030HEPTA/GPS Скачать руководство пользователя страница 117

Страница: 117 / 178

HTTP/HTTPS

GUI

–

ROWSER

ONFIGURATION

NTERFACE

8030HEPTA/GPS GPS - NTP Time Server with 2x 10/100/1000 MBit LAN Interface - V04.00

117 / 178

hopf

Elektronik GmbH

Nottebohmstr. 41

• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]

8.3.7.9 Module Info

This tab indicates information about the hardware and software of the Module 8024GPS (Sync
Source) implemented in the Time Server 8030HEPTA/GPS.

These details might be provided for service and support purposes.

8.3.7.10 Module Reset

This function triggers a hardware reset of (just) the Sync Source (here Module 8024GPS).

This function has no effect on the failsafe stored data.

Содержание 8030HEPTA/GPS



















































































































































































Результаты поиска

Содержание 8030HEPTA/GPS

Отзывы:

hopf Elektronik GmbH 8030HEPTA/GPS, Техническое руководство, Страница: 117 / 178

Результаты поиска

Содержание 8030HEPTA/GPS

Отзывы: