SSH
AND
T
ELNET
B
ASIC
C
ONFIGURATION
82 / 98
7052RC Network Management Server - V01.00
hopf
Elektronik GmbH
Nottebohmstr. 41
• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]
7
SSH and Telnet Basic Configuration
Only basic configuration is possible via SSH or Telnet. The complete con-
figuration of Board 7052RC takes place exclusively via the WebGUI.
It is just as easy to use SSH (Port 22) or Telnet (Port 23) as the WebGUI. Both protocols use
the same user interface and menu structure.
The user names and passwords are the same as on the WebGUI and are kept in alignment
(see
Chapter 6.3.4.10 Passwords (Master/Device)
).
SSH does not allow blank passwords for safety reasons.
The corresponding service is to be enabled for the use of Telnet or SSH
(see
Chapter 6.3.2.7 Management-Protocols
– HTTP, SNMP etc.
)
Navigation through the menu takes place by entering the respective number associated with
the menu option (as can be seen in the above image).
