HTTP/HTTPS
W
EB
GUI
–
W
EB
B
ROWSER
C
ONFIGURATION
I
NTERFACE
46 / 98
7052RC Network Management Server - V01.00
hopf
Elektronik GmbH
Nottebohmstr. 41
• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]
6.3.2.2.8 IPv6
The board 7052RC can also be operated in an IPv6 network.
To enable IPv6,
Use IPv6 Settings
must be set to
enable
.
IPv6 addresses are 128 bits long and they are recorded in eight 4-character hexadecimal
blocks. For example:
2001:0db8:0000:08d3:1319:8a2e:0370:7344
Leading zeroes in a 4-character hexadecimal block can be omitted. For the above example,
this results in the notation:
2001:db8:0:8d3:1319:8a2e:370:7344
In addition,
once
per IPv6 address a consecutive sequence of blocks containing all zeros may
be omitted. But this must be recorded with two consecutive colons. For the above example,
this gives the notation:
2001:db8::8d3:1319:8a2e:370:7344
Another example:
2001:0:0:0:1319:8a2e:0:7344
may be represented
as
2001::1319:8a2e:0:7344
or
2001:0:0:0:1319:8a2e::7344
6.3.2.2.9 DHCP-IPv6
If DHCP is to be used, this function is activated with
enabled
.
6.3.2.2.10 IPv6 Address
If DHCP is not used, enter the IPv6 address here. If the IPv6 address to be used is unknown,
it must be requested by the network administrator.
6.3.2.2.11 IPv6 Subnet Prefix Lengh
If no DHCP is used, the length of the network address must be entered here. If the length of
the network address is not known, it must be requested by the network administrator.
