S
YSTEM
B
EHAVIOUR OF
N
ETWORK
M
ANAGEMENT
S
ERVER
7052RC
7052RC Network Management Server - V01.00
19 / 98
hopf
Elektronik GmbH
Nottebohmstr. 41
• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]
Image Update 7052RC
1. Log in as Master in WebGUI of the board.
2. Select in
Device
tab the menu item
Image Update
.
3. Select the file with the file
.img
via the selection window
(Exapmle:
upgrade_8030gen_rel_vXXXX.img
).
4. The selected file is shown in the selection window.
5. The update process is started with the button
Upload now
.
6. In WebGUI the successful file transfer and writing to the Module is indicated.
7. In WebGUI the successful update is indicated after 2-3 minutes with the request to
release a reboot of the board.
8. After activation and successful reboot of the board the image update process is fin-
ished.
H8 Firmware Update 7052RC
1. Log in as Master in WebGUI of the board.
2. Select in the
Device
tab the menu item
H8 Firmware Update
.
3. Select the file with the file extension
.mot for Board 7052RC
via the selection win-
dow (Example:
H8_8030_vXXXX_128.mot
).
4. The selected file is shown in the selection window.
5. The update process is started with the button
Upload now
.
6. In WebGUI the successful file transfer to the Module is indicated.
7. Now the update of the board automatically starts after a few seconds.
8. After successful update the board automatically reboots.
9. After approx. 2 minutes the H8 update process is finished and the board is again ac-
cessible via WebGUI.
