Security Solutions Partner
46
5) The sender is denied by the server. Maybe the server need to authenticate the user, please check it and try
again
6) The receiver is denied by the server. Maybe because of the anti-spam privacy of the server
7) The message is denied by the server. Maybe because of the anti-spam privacy of the server
8) The server does not support the authentication mode used by the device
Report Internet IP by Mail:
If selected, you will receive emails which contain the camera
’
s internet IP. When
camera power on or Internet IP changed, it will send the internet IP by mail. (For example: IPCAM's URL is
).
3.17 FTP Service Settings
Set the
FTP Service
, you can upload images to your FTP server when motion detection triggered
.
Figure 9.3
Figure 9.4
FTP Server
: If your FTP server is set up in LAN. You can set as Figure 9.3
If you have a FTP server that can be accessed from internet, you can set as Figure 9.4
FTP Port
: Usually the port is 21
FTP Upload Folder
: Make sure that the folder you plan to store images exists. The camera will not create the
folder itself. Also, the folder must be erasable.
FTP Mode
: It supports standard (POST) mode and passive (PASV) mode
Upload Image Now
: It will upload images when you select it. Here
Upload Interval
refers to the time between
the current image and the next image.
