Honeywell VX6 Скачать руководство пользователя страница 74

Страница: 74 / 356

The QWERTY Keyboard

VX6 Reference Guide

E-EQ-VX6RG-F

Control Keys

The VX6 keyboard has several control keys, some of which are not used on the VX6.

Note: The

functions of the <F4> and <F5>keys are not used as the display brightness is

adjusted via the buttons on the control panel.

The 2

functions of the <F6>, and <F7> keys are not used as the VX6 has TFT LCD

screen with no provision for contrast adjustments.

The

functions of the <F8> and <F9> keys are not used as the sound volume on the

VX6 is controlled with the Volume and Sounds icon in the Microsoft Windows CE
Control Panel.

The 2

function of the <F10> key is not used as the display backlight timer also controls

the keyboard backlight.

R/S

BKLT

F10

1. Display

Brightness

Control Keys (Not
used

)

2. Display

Contrast

Control Keys (Not
used)

3. Speaker

Volume

Control Keys (Not
used)

4. Backlight

Control

Key (See above)

Figure 2-29 The VMT Keyboard Display Controls

Содержание VX6




































































































































































































































































































































































Результаты поиска

Содержание VX6

Отзывы:

Honeywell VX6, Справочное руководство, Страница: 74 / 356

Результаты поиска

Содержание VX6

Отзывы: