Honeywell VX6, Справочное руководство, Страница: 216 / 356

196 Summit Radio
VX6 Reference Guide E-EQ-VX6RG-F
TX Diversity
How to handle antenna diversity when transmitting packets to AP.
Options: Main only = Main antenna only
Aux only = Aux antenna only
On = Use diversity
Default: On
!
For a VX6 with a single external antenna use
Main Only
. For a VX6 with dual
external antennas or an internal antenna use
On
.
RX Diversity
How to handle antennas diversity when receiving packets from AP.
Options: Main Only = use main antenna only
Aux Only = use aux. antenna only
On-start on Main
=
On startup use main antenna
On-start on Aux = On startup use aux antenna
Default: On-start on Main
!
For a VX6 with a single external antenna use
Main Only
. For a VX6 with dual
external antennas or an internal antenna use
On-start on main
.
Frag Thresh
If the packet size (in bytes) exceeds the specified number of bytes set in the fragment threshold,
the packet is fragmented (sent as several pieces instead of as one block). Use a low setting in areas
where communication is poor or where there is a great deal of radio interference.
Options: 256 to 2346
Default: 2346
RTS Thresh
If the packet size exceeds the specified number of bytes set in the Request to Send (RTS)
threshold, an RTS is sent before sending the packet. A low RTS threshold setting can be useful in
areas where many client devices are associating with the Access Point.
Options: 0 to 2347
Default: 2347
LED
The LED on the radio card is not visible to the user when the radio card is installed in a sealed
mobile device.
Options: On, Off
Default: Off