Honeywell VX6, Справочное руководство, Страница: 307 / 356

Creating Custom Key Maps for the VX6 287
E-EQ-VX6RG-F VX6 Reference Guide
GENERAL Section
The first section is the
GENERAL
section. This contains the keymap name (all numerics), as well
as the number of rows and columns in the keymap, and the algorithm for converting rows and
columns to a data byte to go into the keymap table.
.
[
General ]
MAPDESC=Preload
MAPNAME=0409
MAPCNT=4
.
MAPDESC Name of this map. This is what appears in the popup menu in the
keyboard control panel
(see also
MAPNAME, below).
MAPNAME ID code of this map, for use with the internal Win32 APIs (which require
a numeric value). On some software revisions, MAPNAME may appear
in the popup window instead of MAPDESC.
MAPCNT Gives the number of MAP sections (and hence keymap tables) in this
source file.
MAPCOLS Number of columns in each keymap table. This is defined by the
hardware keyboard.
MAPROWS Number of rows in each keymap table. This is defined by the hardware
keyboard.
ALGOR Defines the algorithm for converting row/column to internal scan code.
Current values are:
MX3X scancode = ((column << 3) + row)
SPECIAL Section
.
[
Special ]
KEYSHIFT=COL8ROW0
KEYALT=COL9ROW0
.
The second section is the
SPECIAL
section, which contains the row and column definitions for
certain modifier keys which must be processed independent of the overall keymap. Currently,
these are only modifier keys.
The only recognized names are:
KEYSHIFT
,
KEYALT
,
KEY2ND
, and
KEYCONTROL
, and
these specify the row and column of these 4 specific modifier keys, in COLxROWx format. Note
the row and column for these keys can be outside the keymap limits specified in the
GENERAL
section, since these are not loaded as part of the keymap proper.