Honeywell VX6 Скачать руководство пользователя страница 164

Страница: 164 / 356

144

Wavelink Avalanche Enabler Configuration

VX6 Reference Guide

E-EQ-VX6RG-F

Scan Config

Note: Scan Config functionality is a standard option of the Wavelink Avalanche System but is

not currently supported by LXE on Windows CE.

Figure 3-39 Scan Config Option

Display

Figure 3-40 Window Display Options

Update Window Display

The user interface for the Enabler can be configured to dynamically change based on the status of
the connection with the Mobile Device Server.

At startup

Half screen, Hidden or Full screen. Default is Half screen.

On connect

As is, Half screen, full screen, Locked full screen. Default is As is.

Normal

Half screen, Hidden or As is. Default is As is.

Содержание VX6




































































































































































































































































































































































Результаты поиска

Содержание VX6

Отзывы:

Honeywell VX6, Справочное руководство, Страница: 164 / 356

Результаты поиска

Содержание VX6

Отзывы: