Honeywell VX6, Справочное руководство, Страница: 141 / 356

Backup VX6 Files using ActiveSync 121
E-EQ-VX6RG-F VX6 Reference Guide
Create a Communication Option
1. On the VX6, select
Start | Settings | Control Panel | Network and Dialup Connections
. A
window is displayed showing the existing connections.
2. Assuming the one you want does not exist, double-click
Make New Connection
.
3. Give the new connection an appropriate name. Click the
Direct Connection
radio button.
Click the Next button.
4. From the popup menu, choose the port you want to connect to. Only the available ports are
shown.
5. Click the
Configure...
button.
6. Under the
Port Settings
tab, choose the appropriate baud rate. Data bits, parity, and stop bits
remain at 8, none, and 1, respectively.
7. Under the
Call Options
tab, be sure to turn off
Wait for dial tone
, since a direct connection
will not have a dial tone. Set the timeout parameter (default is 90 seconds). Click OK.
8.
TCP/IP Settings
should not need to change from defaults. Click the
Finish
button to create
the new connection.
9. Close the
Remote Networking
window.
10. To activate the new connection select
Start | Settings | Control Panel | PC Connection
and
click the
Change
button.
11. Select the new connection. Click OK twice.
12. Close the Control Panel window.
13. Connect the desktop PC to the VX6 with the appropriate cable.
14. Click the desktop Connect icon to test the new connection.
You can activate the connection by double-clicking on the specific connection icon in the Remote
Networking window, but this will only start an RAS (Remote Access Services) session, and does
not start ActiveSync properly.