manualshive.com logo in svg

Honeywell VX6, Справочное руководство, Страница: 134 / 356

Поделиться
Скачать
Honeywell VX6 Скачать руководство пользователя страница 134

114 

Control Panel Options 

VX6 Reference Guide 

E-EQ-VX6RG-F 

Memory 

 

Figure 3-30  System / Memory 

Move the slider to allocate more memory for programs or storage. If there isn’t enough space for a 
file, increase the amount of storage memory. If the VX6 is running slowly, try increasing the 
amount of program memory. Adjust the settings and click the OK box to save the changes. The 
changes take effect immediately. 

Device Name 

 

Figure 3-31  System / Device Name 

The device name and description can be changed. Enter the name and description using either the 
keypad or the Input Panel and tap OK to save the changes. The changes take effect immediately. 

Copyrights 

This screen is presented for information only. The Copyrights information cannot be changed by 
the user. 

Содержание VX6





































































































































































































































































































































































Отзывы:

Нет отзывов