Honeywell Vertex Edge, Руководство пользователя

Страница: 28 / 165

Sample Transport Time
The shorter the sample line, the shorter the transport time. If monitoring a critical location, it
may be desirable to place the monitor near that critical area to reduce sample transport time for
that location.
Monitor Dimensions
Monitor dimensions are important factor in monitor placement. The Vertex Edge System is 24
in. (61 cm) wide, 34-1/2 in. (88 cm) deep and 76 in. (193 cm) in height. The system with 9
analyzers weights about 900 pounds (408 kg). Allow for 24 in. (61 cm) door swing; 5 in. (12.3
cm) at rear and 5 in. (12.3 cm) on sides. Allow clearance above the monitor for installing sample
lines.
Sample Locations
Before installing the Vertex Edge System, evaluate the sampling locations to determine the
presence of excessive dust or moisture. An external filter must be used in all locations. Make
sure you use the correct filter. Dust may be a result of construction as well as manufacturing
activities. Moisture may result from rain entering a line at an outdoor sampling location or from
condensation caused by temperature fluctuations. Water condensation in the sample lines could
cause false alarms.
Note: Variables such as airflow, the molecular weight and temperature of the sample gas, and
the physical conditions of the areas being monitored influence the placement of the sampling
locations. You may need to consult your company’s industrial hygienist or safety officer before
installing sample lines to determine your company’s policy related to sampling locations and
monitoring of the desired sample gas.
Sample Line Particulate Filter Use
See Specifications, to determine which filter type should be used at the location.
Vertex Edge System 27 User Manual