SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
MCS--4200/7200 Multi--Channel SATCOM System
23--20--35
15 Jul 2006
Honeywell International Inc. Do not copy without express permission of Honeywell.
Page 6--43
4
Other Information
a
The SELF--TEST page lists two failures per page if failures are detected
during the PAST(self--test). These two sets of lines (lines 5, 6, and 7
and lines 9, 10, and 11) display Level 1 diagnosed current failures.
Failures are shown in chronological order (i.e., the most recent detected
failure last) with no more than two failures displayed per page.
b
The number of TEST pages depends on the number of current failures
to report (up to a maximum of 99 pages). When there is an odd number
of current failures to report, the odd failure is displayed on a separate
page in lines 5, 6, and 7, and lines 9, 10, and 11 are blank. If there are
no failures to report, lines 5, 6, 7, 9, 10, and 11 are blank except as
noted in paragraph 3.
c
Line 5 and, if applicable, line 9 display the ATA number beginning in
column 1 and the class number beginning in column 23. The ATA
number is displayed as aaaaaa, where aaaaaa represents the ATA
reference number of the reported failure as specified in paragraph 3.E.
for each type of CFDS. For CFDS type none, no ATA number is
displayed. The class number is displayed as c, where c represents the
class (1, 2, or 3) of the failure.
d
Lines 6 and 7 and, if applicable, lines 10 and 11 display a text message,
as specified in paragraph 3.E. for each CFDS type, for the reported
failure beginning in column 1.
(6) CONFIGURATION DATA Pages
(a) General
1
Access to these pages is from the SAT--N (i.e., SATCOM MAINTENANCE)
page. The purpose of these pages is to display the status of SATCOM
configuration input parameters. See Figure 6-8 for example pages.
(b) CONFIGURATION DATA Page 1 (Figure 6-8, sheet 1):
1
Data Fields
a
Line 3
(1) This line displays the ICAO address of eight octal characters, as
determined by discrete inputs from the ICAO address straps. This
display is not derived from any ARINC 429 version of the ICAO
address.
b
Line 5
(1) This line displays CONFIG as determined by the setting of the
system configuration pins, followed by (HEX). The configuration pin
settings are mapped into hexadecimal digits as shown in
Table 6-10. In the figure, digits 0 thru 9 correlate to hexadecimal
digits 0 thru 9 in the table.
