Honeywell Satellite XT Скачать руководство пользователя страница 51

Страница: 51 / 69

Satellite XT R Version

7-2

7.1.2 Faults

Instrument faults refer to a problem which prevents the instrument from operating properly

and interferes with the ability to monitor or document concentration alarms.

If the instrument has detected an instrument fault, the green status LED is off and the fault

relay is activated. The LCD display is flashing while indicating the specific fault message.

Fault - ADC Not Ready !

This indicates that there is a problem with the internal

electronics. The AD Converter has failed.

Switch power supply for this unit off and on again. If the

instrument still shows this message, switch off power supply

for this unit and contact MST for further instructions.

Fault - No Sensor !

This message indicates that no sensor is inserted or that

a sensor type not suitable for the Satellite XT is used. To

eliminate the problem, insert the correct sensor.

Fault - Wrong Sensor !

This message indicates that the sensor installed is not the

sensor assigned to this particular instrument.

To correct the problem, insert the sensor assigned and

documented to this instrument. The data are stated in the test

certificate provided with the shipment.

Fault - Replace Sensor !

This message indicates that the sensor presently installed is

depleted (the warning CHECK SENSOR ! has been ignored).

To correct the problem, replace the old sensor immediately.

! This function is not available for instruments with

oxygen sensor.

- - - - F AU L T - - - -

ADC NOT RE ADY !

- - - - F AU L T - - - -

NO S ENSOR !

- - -

F A

U L

S E

- -

- - - - F AU L T - - - -

RE P L ACE S ENSOR !

Troubleshooting - Section 7

Содержание Satellite XT






































































Результаты поиска

Содержание Satellite XT

Отзывы:

Похожие инструкции для Satellite XT

Бренды по названию

Популярные бренды

Honeywell Satellite XT, Руководство по эксплуатации

Результаты поиска

Содержание Satellite XT

Отзывы:

Похожие инструкции для Satellite XT

Бренды по названию

Популярные бренды