manualshive.com logo in svg

Honeywell Satellite XT, Руководство по эксплуатации

Поделиться
Скачать
Honeywell Satellite XT Скачать руководство пользователя страница 31

Satellite XT R Version

5-2

Gas Calibration 

The gas calibration submenu is used for dynamic 

calibration. For zero adjustment use clean or synthetic 

air free from measuring gas or any other interfering 

gases. The sensor must be warmed-up before

calibration. For span adjustment it is recommended 

to use test gas of a known concentration at or slightly 

above the TLV for the target gas. 

Always keep to the correct sequence, first perform 

zero adjustment, then Span Adjustment.

Zero Adjust 

Zero adjustment applies for all sensors except oxygen 

sensors.

Use the <set> key to enter and follow the dialogue 

displayed. 

Apply Air ! 

Apply clean or synthetic air to the sensor and actuate 

the <set> key to continue.

<Actual Zero Point>

Allow the zero reading to stabilize. If the reading is 

already zero, zero adjustment is not necessary. Actuate 

the <esc> key to exit. If the reading is not zero, actuate 

the <set> key to re-adjust the zero point and to continue 

the procedure.

<Re-adjusted Zero Point>

The reading is zero. Actuate the <set> key to proceed. 

Save ? 

Actuate the <set> key to save the new zero point and 

store it in the unit’s internal memory. 

continued

s e l e c t :

1

o f

2

G A S C A L I B R A T I O N

Z ERO AD J US T

u s e c l e a n a i r !

Z E R O   A D J U S T

A P P L Y A I R !

V a l u e s t a b l e ?

Z E R O   A D J U S T

0 . 0 1 p pm

V a l u e o . k . ?

Z E R O   A D J U S T

0 . 0 0 p pm

< s e t > t o c o n f i r m

Z E R O   A D J U S T

S A V E ?

s e l e c t :

1

o f

2

C A L I B R A T I O N

GA S   CA L I BRA T I ON

Calibration - Section 5

Continued

Содержание Satellite XT






































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды