Honeywell MX8, Справочное руководство

Страница: 233 / 318

Launch Error Messages
Launch displays a message if it encounters an error during the processing of a script. It is possible to get cascading error
messages, as Launch does not stop processing the script if it encounters an error. An example of this would be a failure
creating a directory causing the failure of all files copied to that directory.
Here is a list of the possible error messages that could be given:
Error Message Given by Description
Bad wait code wait-code Launch LaunchCmd The wait-code wasn’t recognized
Directory Creation Failed
error-code
MkDir There was a problem encountered creating the directory
Directory Removal Failed
error-code
RmDir There was a problem encountered removing the directory
Error reading script file - An error occurred reading the script file.
File Copy Failed error-code Copy Fcopy There was a problem encountered copying the file
File Delete Failed error-code Delete There was a problem encountered deleting the file
Invalid Command: com-
mand
- The command wasn’t recognized
Invalid Data Length data SetRegData Tried to set more than 2000 byte values in a binary field
Invalid Data Type type SetRegData The value of the type parameter is invalid
Invalid decimal data data SetRegData The data field doesn’t contain decimal data
Invalid hex data data SetRegData The data field doesn’t contain hexadecimal data
Invalid Registry Key key
DelRegData DelRegKey
SetRegData DelRegKey
The key parameter to the command has not been recognized
Parms: Invalid Create Direc-
tory
MkDir Not enough parameters were supplied.
Parms: Invalid Create Reg-
istry Key
SetRegKey Not enough parameters were supplied.
Parms: Invalid Create Short-
cut
Shortcut Not enough parameters were supplied.
Parms: Invalid Delete Reg-
istry Data
DelRegData Not enough parameters were supplied.
Parms: Invalid Delete Reg-
istry Key
DelRegKey Not enough parameters were supplied.
Parms: Invalid File Copy Copy Fcopy Not enough parameters were supplied.
Parms: Invalid File Delete Delete Not enough parameters were supplied.
Parms: Invalid Program
Name
Launch LaunchCmd Not enough parameters were supplied.
Parms: Invalid Remove
Directory
RmDir Not enough parameters were supplied.
6-19