Honeywell MX8, Справочное руководство

Страница: 303 / 318

32 key Alpha-Mode Keymap
l
The following keypad keymap is used on an MX8 that is NOT running a Terminal Emulator. Honeywell terminal
emulators use a separate keymap.
l
When using a sequence of keys that require an alpha key, first press the Alph key. Use the Shft sticky key for upper
case alphabetic characters.
l
Tapping the Power key when in any sticky mode (Blue, Orange, Shift, etc) either turns the device On (when Off) or
places it in Suspend (when active).
l
Pressing the Alph key locks the keypad into alpha mode. Pressing Alph a second time toggles alpha mode off.
l
To create a combination of numbers and letters before pressing Enter, remember to tap the Alph key to toggle between
Alpha and Numeric mode.
l
Since letters are mapped to Alt, Ctl, Shft, these modifiers must be pressed before Alph. For example, for Alt T, press
Alt, then Alph, then Alt again.
l
When using a sequence of keys that do not include the Alph key but does include a sticky key, press the sticky key first
then the rest of the key sequence.
l
For those keymaps that require remapping (MAP), keys can be remapped using the Buttons Panel (Start > Settings >
Personal > Buttons).
To get this Key / Function Press these Keys in this Order
Power / Suspend Power
Field Exit
(default is VK_PAUSE)
MAP = Mappable
Blue (MAP) Shft (MAP) Diamond #1
= Orange Shft (MAP)
Diamond#2
Default is Mappable
( Blue Shft (MAP)
Diamond#2
Default is Mappable
! Orange Shft (MAP)
Diamond#3
Default is Mappable
) Blue Shft (MAP)
Diamond#3
Default is Mappable
Volume Adjust Mode Orange Scan
Up Arrow
Down Arrow
Display Backlight Brightness
Adjust Mode
Blue Scan
Up Arrow
Down Arrow
Toggle Alpha Mode Alph
Toggle Blue Mode Blue
Toggle Orange Mode Orange
Toggle Shift Mode Shft
Alt Mode Alt
Control Mode Ctrl
8-7