Honeywell MX8, Справочное руководство

Страница: 173 / 318

Continuous Scan Mode
Start > Settings > System > Data Collection > Main
Continuous scan mode is only available if the MX8 is equipped with a Symbol or Honeywell scanner. Continuous scan mode
draws power from the main battery every time a scan read/decode sequence is performed.
Enabling Continuous Scan Mode will ensure the laser is always on and decoding. Do not scan decoder engine configuration bar
codes when Continuous Scan Mode is on. Configuration bar codes do not decode when scanned while Continuous Mode is
On.
Caution: Laser beam is emitted continuously. Do not look or stare into the laser beam.
Set the Timeout between same symbol to a value sufficient to prevent the beeper from continuously beeping when a symbol is
left in the scanner’s field of view.
If trigger mode, power mode, or timeout between same symbol parameters are changed using external configuration bar codes
in the
Integrated Scanner Programming Guide , the operating system automatically restores the parameters to their
programmed settings upon a suspend/resume or cold boot and/or any change made in the Data Collection settings. The MX8
will beep twice when a configuration bar code is successfully scanned.
When the scanner is in continuous mode the trigger and scan buttons function as a scanner On/Off switch.
The scanner red LED will always be off in continuous mode. The audio beeps and green LED work the same as they do for
normal trigger mode.
Switching to and from continuous and normal trigger modes is in effect after upon tapping the ok button and waiting for the
amber scan LED to go out. A cold boot is not required or necessary.
5-5