Honeywell MX8, Справочное руководство

Страница: 112 / 318

Bluetooth Devices
A device previously discovered and paired with the MX8 is shown in the Bluetooth Devices panel.
Note: When an active paired device, not the MX8, enters Suspend Mode, is turned Off or leaves the MX8 Bluetooth
scanning range (approximately 32 feet or 10 meters), the Bluetooth connection between the paired device and the MX8
is lost. There may be audible or visual signals as paired devices disconnect from the MX8.
The discovered paired devices may or may not be identified with an icon. Discovered devices without an icon can be paired;
the Bluetooth panel assigns an icon to the device name.
An icon with a red background indicates the device's Bluetooth connection is inactive.
An icon with a white background indicates the device is connected to the MX8 and the device's Bluetooth connection is active.
Doubletap a device in the list to open the device properties menu. The target device does not need to be active.
Clear Button
Deletes all devices from the Device table that are not currently paired. A dialog box is presented, " Delete all disconnected
devices? Yes/No ". Tap the Yes button to remove disconnected or deleted devices from the device table. The devices are
removed from the Device table after any reboot sequence and when EZPair is re-launched without a reboot sequence. Tap the
No button to make no changes.
See Clearing Pairing Table on Boot.
4-74