Honeywell MX8, Справочное руководство

Страница: 170 / 318

Return to Factory Default Settings
After scanning the scanner-engine-specific bar code to reset all scanner parameters to factory default settings (i.e., Reset All,
Set Factory Defaults, Default Settings, etc.), the next step is to open the Data Collection settings panel. Tap ok and close the
Data Collection panel. This action will synchronize all scanner formats for your device. Another option you can use to reset the
Data Collection panel is to scan the LXEReset bar code (for Symbol and Hand Held Products scan engines) or the N43Reset
bar code (for the Honeywell Laser Scanner N43XX) located in the
Integrated Scanner Programming Guide . The MX8 will beep
twice when a configuration bar code is successfully scanned.
Using Programming Bar Codes
Engine specific configuration bar codes are contained in the Integrated Scanner Programming Guide . They can be used to set
or reset scan engine parameters by scanning a bar code, then saving the change. Honeywell, Symbol and Intermec scan
engines can be programmed using programming bar codes. The MX8 will beep twice when a configuration bar code is
successfully scanned.
Hand Held Products Imager
There are no configuration bar codes for this imager. Use the HHP Properties button on the Data Options tab and the Advanced
button available on many of the individual Symbology Settings screens to configure the Hand Held Products Imager.
5-2