page 11 of 24
C7.
Connecting the fall arrester to the full body harness:
1.
Pull-down the knurled bushing (4.1) of the karabiner.
2.
Then turn the knurled bushing and press it inwards.
3.
Attach it directly in the attachment point of the full body harness.
4.
Release the knurled bushing, it locks automatically.
Fig. C1
C8.
Danger!
An unsecured karabiner (open knurled bushing) is dangerous to
human life
.
C9.
The abdominal or thoracic strap of the full body harness must fit the
body tightly (see Fig. C1).
Fig. C2
C10.
Danger!
The karabiner of the fall arrester must be directly inserted into the
front attachment point of the full body harness. The length of the
intermediate joint (length between the cable and the inner curve of the eye
on the harness) must not exceed 200 mm.
Fall arrester D-ring
attachment
element
attachment
element
front D-ring of
harness
harness
body
correct
incorrect
