page 12 of 24
C11. Inserting in the guiding cable:
Fig. C3
1: Lock knob
2: Slider
3: Latch
1. Press the lock knob (1).
2. With the lock knob pressed (2) push slider 2 into the casing.
3. Through the now-open gap in the casing of the shuttle, place the
shuttle on the cable such that the arrow on the casing points
upward.
4. Release the slider (2) and the lock knob (1).
5. The shuttle for the
Vi-Go
system is now connected to the guide
cable.
6. Check whether the shuttle can freely slide vertically on the guide
cable.
7. Check the functioning of the locking and catch mechanism by
moving the latch (3).
Fig. C4
