manualshive.com logo in svg

Honeywell MicroDock II, Руководство по эксплуатации

Поделиться
Скачать
Honeywell MicroDock II Скачать руководство пользователя страница 56

MicroDock II Automatic Test and Calibration Station

56

When the datalog has successfully transferred from the station to the MMC card, 
the following screen displays.

On the station, press 

4. 

 Pass to return to the normal operating screen.

NOTe

A maximum of ten data logs from all modules combined can be stored on 

an MMC card. When the maximum storage is reached, the station replaces 

the oldest datalogs with the newest datalogs. Datalogs are not recorded 

in the Results History.

Base Station MMC Card

Event Logging

Bump checks and calibrations are recorded on a Multi-media card (MMC). The MMC 
card is located on the station inside the battery compartment. It is used to store test 
records that are then downloaded from the station to a PC.

Inserting/Replacing a MMC Card

The MMC card is inserted in the station inside the battery compartment. To insert or 
replace the MMC card, refer to Figure 14 and complete the following procedures:

Figure 14. Replacing a MMC Card

Deactivate the station.

1. 

Loosen, the retaining screws from the battery cover.

2. 

Remove the battery cover and set it aside.

3. 

Remove the current MMC card (if applicable).

4. 

Insert the new MMC card into the memory card slot.

5. 

Replace the battery cover and tighten the retaining screws.

6. 

Data that is saved on the MMC card can be transferred to a PC.

To format an MMC card, refer to 

Format the MMC Card

 in the 

User Options Menu

 

section.

The transferred data is then compiled using a computer software application called 
Fleet Manager II. Refer to the Fleet Manager II Deluxe CD for installation and user 
instructions.

Содержание MicroDock II





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды