Honeywell MicroDock II Скачать руководство пользователя страница 37

Страница: 37 / 68

MicroDock II Automatic Test and Calibration Station

Incorrect Passcode Entered: If an incorrect Passcode is entered, the
station automatically returns to the normal operation screen.

Press

OK. The LCD returns to the normal operating screen. Repeat

steps #1-4.

Language

The station provides five language options and is used to display all text on the
LCD to a selected language.

To select a different language, complete the following:

From the user options menu, press

^ to scroll to the Language:

option.

NOTe

The station is shipped with the factory default set to English (

Eng

Press

sel to confirm the selection and activate the field (: changes to *).

Press

^ to scroll to the different language options. The available

options are

Eng

•

(English),

Fran

•

(French),

Deut

•

(German),

Port

•

(Portuguese), and

Espa

•

(Spanish).

When the desired language displays, press

sel to confirm the selection

and deactivate the field (* changes to :).

The LCD now displays all of the screens in the selected language.

Press

^ to scroll to another user option

Press

sortie (exit) to return to the normal operating screen.

Содержание MicroDock II





































































Результаты поиска

Содержание MicroDock II

Отзывы:

Бренды по названию

Популярные бренды

Honeywell MicroDock II, Руководство по эксплуатации

Результаты поиска

Содержание MicroDock II

Отзывы:

Бренды по названию

Популярные бренды