Honeywell Lyric LCP300-LC, Инструкция по установке и справочник

Страница: 14 / 48

Lyric Gateway Installation and Reference Guide
- 14 -
Mechanics of Programming
Mechanics of Programming Mechanics of Programming
Mechanics of Programming
Programming Programming Programming Programming
The Lyric Gateway is programmed via AlarmNet 360
TM
using a smart (mobile) device or a laptop. There are
numerous options for programming the Gateway, Sensors, Wireless Keys and Keypads and accessories. Refer to
the Lyric Gateway Quick Installation Guide (p/n 800-21668) for information regarding programming.
Navigating Navigating Navigating Navigating
Gateway
Gateway Gateway
Gateway Touchp
Touchp Touchp
Touchpad
ad ad
ad
Gateway’s touchpad can be used for Basic Security Functions. The touchpad provides a number of functions
and indicators. The System Status Shield is lit Green when the system is ready or flashes Red when it is not.
When the system is armed the System Status Shield is lit Red. Refer to the table below for additional indications
and functions. Additional functions are available via the AlarmNet 360, MyHome Gateway and Total Connect
Apps or the associated websites.
gw_keypad-019-V0
LYRIC
LYRIC LYRIC
LYRIC
™ ™ ™ ™
Gateway
Gateway Gateway
Gateway
Key
Key Key
Key Description
Description Description
Description
System Status Shield System Status Shield System Status Shield System Status Shield – System status is
displayed when the shield is lit as follows:
Green (steady) – Ready to Arm and during
sensor enrollment from AlarmNet 360
Green (flashing) – Zone is faulted
Red (steady) – System is Armed
Red (slow flash) – Entry/Exit delay countdown
Red (rapid flash) – System is in Alarm
White (steady) – Waiting for User Code entry
ARMED
Away
Arm Gateway in Away mode (LED steady red
when selected)
ARMED
Home
Arm Gateway in Home mode (LED steady red
when selected)
Disarmed
Disarm Gateway (LED flashes green until code
is entered, then turns steady green)
Alert
Flashes red when an alert condition exists.
Select to hear condition
Cancel
Cancel User Code entry or Emergency
(Flashes white during an emergency) and
silence beeping due to faults
Emergency Activates Emergency keys
Fire key
Fire key Fire key
Fire key ---- Initiates panic fire alarm within 5
seconds of activation.
Police key
Police key Police key
Police key ---- Initiates panic police alarm within
5 seconds of activation
Medical key Medical key Medical key Medical key ---- Initiates panic medical alarm
within 5 seconds of activation
Gateway Gateway Gateway Gateway Menu Mode Menu Mode Menu Mode Menu Mode
Entering the Master User Code or Installer Code +11 on the Gateway touchpad provides access to Menu Mode.
The system announces the menu options based on the code that was entered.
Code Entered Code Entered Code Entered Code Entered Menu Option (System Menu Option (System Menu Option (System Menu Option (System Announcement Announcement Announcement Announcement))))
Master User (1234)
Press 20 to delete all enrolled MyHome Gateway apps
Press 21 to enter MyHome Gateway app Enroll Mode
Press 31 to enter or exit Access Point (AP) mode
Press 41 to enter or exit WPS mode
Installer (4112)
Press 31 to enter Access Point mode
Press 41 to enter or exit WPS mode.
Press 51 to enter Go/No-Go Test mode
Keypad Lockout
Keypad Lockout Keypad Lockout
Keypad Lockout
In the event that 24 numeric keys (0-9) have been entered within a 15-minute window and a valid command is
not executed, the system stops processing additional numeric key presses for a period of 15 minutes. Any
numerical keys entered during that period will be ignored. CID Code 461 Wrong Code Entry will be entered in
the Event Log and transmitted to the Central Station. When the 15-minute lockout window expires, a Restore
message is sent to the Central Station and entered into the Event Log.