Honeywell HRSD16, Руководство пользователя

Страница: 133 / 176

Operation
Document 800-03650 Rev D 133
02/09
Figure 4-19 Motion Search Option Screen
You can search video from the first to last recorded images, or you can set the
start and stop times and dates.
2. Select your search options.
Table 4-12 Motion Search Options
Option Action
From Highlight the box beside From and then press to toggle between On and Off.
When set to Off, you can enter a specific Date and Time. When set to On, the DVR
searches from the first recorded image.
To Highlight the box beside To and then press to toggle between On and Off. When
set to Off, you can enter a specific Date and Time. When set to On, the DVR searches
from the last recorded image.
Type Highlight the field beside Type and then press . You can select between Motion
Search and Museum Search. Motion Search detects motion in the defined area.
Museum Search detects if a defined object has moved.
Zone Highlight the field beside Zone and then press . An image from the video appears
overlaid with a grid. You can turn sensor blocks On and Off to define the area of the
picture in which you want to search for motion.
The zone should be placed or focused on the centre or, at least, within the outline of
the targeted object.
Note Defining the area of the image in which you want to search for motion is nearly identical to
setting up the DVR for Motion Detection. Please see
Motion Detection Setup on page 84 in
Chapter 3, Configuration for more detailed instructions on setting up the detection blocks.
Note When setting the Museum Search Zone, the zone should be placed inside the border line of
the target object. If the selected block is placed on the border line, the sensitivity of the Museum
Search may decrease.
Sensitivity Highlight the field beside Sensitivity and then press . You are now able to select
from 1 (low sensitivity) to 5 (high sensitivity).
Min. Blocks Highlight the field beside Min. Blocks and then press . You are now able to set
the number of sensor blocks that must be activated. You can set the Min. Blocks only
if Motion Search is selected.