Honeywell HREP216, Руководство пользователя

Страница: 111 / 200

800-15802 - A - 12/2013
Recording Setup | 111
Note The SIZE/FPS/QUALITY and SCHEDULE setup is performed the same as
was described in the
Continuous Recording Settings section ( page 108 ).
For more information on setting resolution, FPS and quality, see
Size/FPS/Quality Settings on page 108 . For more information on setting
a motion recording schedule, see Schedule Setting on page 109 .
4. To apply the change, click APPLY at the bottom of the screen.
5. When finished, press the EXIT button on the remote control or click CLOSE in the lower
part of the screen. The confirmation message appears and you will return to the previous
menu.
Alarm Recording Settings
Specify the recording quality of the alarm event if it occurs and make a schedule for that
recording.
1. From the RECORDING menu, select ALARM RECORDING (see Figure 5-7 ).
Figure 5-7 Alarm Recording Settings
2. Use the

,

,

, and

buttons on the remote control or use the mouse to select either
SIZE/FPS/QUALITY or SCHEDULE .
3. Set each item of RESOLUTION , FPS , QUALITY and use of the AUDIO for the alarm
recording.
Note The SIZE/FPS/QUALITY and SCHEDULE setup is performed the same as
was described in the
Continuous Recording Settings section ( page 108 ).
For more information on setting resolution, FPS and quality, see
Size/FPS/Quality Settings on page 108 . For more information on setting
a alarm recording schedule, see Schedule Setting on page 109 .