manualshive.com logo in svg

Honeywell GSMVLP4G, Инструкция по установке и программированию, Страница: 8 / 24

Поделиться
Скачать
Honeywell GSMVLP4G Скачать руководство пользователя страница 8

– 8 – 

 

Table 1 – 7720P Normal and Shift Key (shift LED lit) Functions 

KEY 

NORMAL KEY FUNCTION 

SHIFT KEY FUNCTION 

BS/ESC 

[BS]: Press to delete entry 

[ESC]: Press to quit program mode; also can reset 
programming defaults* 

↓

/

↑

 

[

↓

]: Scroll down programming 

[

↑

]: Scroll up programming 

N/Y 

[N]: Press for "NO" answer 

[Y]: Press SHIFT-Y for "YES" answer 

SHIFT 

Press before pressing a SHIFT key function. Will light SHIFT LED. LED goes out once a key is pressed. 
Press again for each SHIFT function desired. 

1/A 

[1]: For entering the number 1 

[A]: For entering letter A 

2/B 

[2]: For entering the number 2 

[B]: For entering letter B 

3/C 

[3]: For entering the number 3 

[C]: For entering letter C 

4/D 

[4]: For entering the number 4 

[D]: For entering letter D 

5/E 

[5]: For entering the number 5 

[E]: For entering letter E 

6/F 

[6]: For entering the number 6 

[F]: For entering letter F 

7/S 

[7]: For entering the number 7 

[S]: For entering letter S 

8/T 

[8]: For entering the number 8 

[T]: For entering letter T 

9/X 

[9]: For entering the number 9 

[X]: For entering letter X 

SPACE 

[SPACE]: For scrolling option list 

No SHIFT function 

0 

[0]: For entering the number 0  

No SHIFT function 

#/ENTER 

[#/ENTER]: Starts programming 
mode; Press to accept entries 

No SHIFT function 

*Active only when the "Exit Programming Mode" prompt is displayed. 

 

Programming Conventions 

Programming is accomplished by answering a series of prompts (questions).  Most prompts require only 

a [Y]es or [N]o response, while others require a numerical response (ID numbers, etc.).  

The current value is displayed on the second line in parentheses ( ).  A "?" indicates an invalid entry.   

Use the [ENTER] key to accept the current entry and proceed to the next prompt. If the entered value 

is invalid, pressing [ENTER] re-displays the prompt; the next prompt is not displayed until a valid 

answer is entered.   

Use the up/down arrow keys to scroll through the programming questions without changing any values.  

Press the [ESC] key to go to the end of the list of questions. 

PROGRAMMING 

ECP Mode Programming 

The GSMVLP4G supports ECP messaging to communicate with the control panel.  Lynx Plus 

Series/ReadyGuard Plus Series control send Contact ID format alarms to the GSMVLP4G directly on 

the 4-wire console bus. Refer to Table 2 for GSMVLP4G programming and follow the prompts. 
Press the [ENTER] key to begin programming. 

NOTE:

  The central station can remotely block access to local device 

programming. If this has been done, the following prompt appears: 

 

Access to Prog 
Mode Denied

 

 

Содержание GSMVLP4G

























Отзывы:

Нет отзывов