– 19 –
GSMVLP4G Status Displays (Continued)
[E]
PriRSSI 2G
REG
-xxxdbm stat x
GSMVLP4G Status Display Screen 1
(4G Radio operating with 2G Service)
PriRSSI – Primary Site RSSI level in dbm
2G – Radio module is communication on the 2G Network
where “stat” can be:
Good RSSI -20 to -89 dbm
OK RSSI -90 to -98 dbm
Marginal RSSI -99 to -104 dbm
Bad RSSI -105 to -150 dbm
REG – Registration status from radio module where “x” can be:
N – Not Registered
H – Registered Home
S – Searching
D – Registration Denied
R – Registered Roaming
? – Unknown Registration State
Press the [space] key to go to the next screen.
Press the [backspace] key to go to the last screen.
RAT EC/NO
2G NA
GSMVLP4G Status Display Screen 2
(4G Radio operating
with 2G Service OR 2G Radio
)
RAT – Radio Access Technology. Either 2G OR 3G/4G
EC/NO – Carrier Noise Ratio (CNR) (not a 2G parameter – NA
will be displayed)
Note:
If a 2G radio is installed this display will not appear.
Press the [space] key to get to the next screen.
Press the [backspace] key to go to the previous field.
CNtry NetW LAC
xxx xxx xxxxx
GSMVLP4G Status Display Screen 3
(4G Radio operating
with 2G Service OR 2G Radio
)
CNtry – Country Code
NetW – Network Code
LAC – Local area code
Press the [space] key to get to the next screen.
Press the [backspace] key to go to the previous field.
Cell BaseSt Chan
xxxx xx xxx
GSMVLP4G Status Display Screen 4
(4G Radio operating
with 2G Service OR 2G Radio
)
Cell – Base Station ID
BaseSt – Base Station Antenna Sector
Chan – Control Channel in use
Press the [space] key to go to the next screen.
Press the [backspace] key to go to the previous field.
Second Site RSSI
Available
GSMVLP4G Status Display Screen 5
(4G Radio operating
with 2G Service OR 2G Radio
)
Secondary Site RSSI availability. The system displays Available
or Not Available.
Press the [space] key to go to the GSMVLP4G Status Display
Screen 1.
Press the [backspace] key to go to the previous field.