manualshive.com logo in svg

Honeywell GSMVLP4G, Инструкция по установке и программированию, Страница: 15 / 24

Поделиться
Скачать
Honeywell GSMVLP4G Скачать руководство пользователя страница 15

– 15 – 

 

Register through the AlarmNet Direct Website 

To register the module via the website (if you are already signed up for this service), go to:

  

https://services.alarmnet.com/AlarmNetDirect/userlogin.aspx.   
Log in and follow the on-screen prompts. 
If you are not signed up for this service, click on “Dealer Signup” from the login screen to gain access to 

the Honeywell web-based programming.  
You will be instructed how to proceed upon completing the sign-up form. Only one sign-up per dealer is 

required. Once an initial user is established, additional logins may be created by that user.  

NOTE:

 Central Stations sign up by contacting AlarmNet Administration at 800-222-6525 option 3. 

Please have the following information available when programming the device: 
1.

 

Primary City ID (two-digit number) 

2.

 

Primary Central Station ID (two-digit hexadecimal number) 

3.

 

Primary Subscriber ID (four-digit number) 

4.

 

MAC ID and MAC CRC number (located on outside of box and on label inside module) or MIN 

number of the device you are replacing. 

Once module is registered, you may log out of the AlarmNet Direct website. 

 

Register Using the Test Message/Registration Switch 

Initiate the registration sequence by clicking the Test Message/Registration Switch three times. You 

can monitor the registration process by viewing the Status Display. The Message (yellow) LED and the 

Status (green) LED will blink slowly in unison while registration is in progress. Once the registration 

has been completed successfully, the GSMVLP4G/GSMVLPCN4G enters normal operating mode; the 

Status (green) LED goes out and the Message (yellow) LED is lit to indicate that the power-on / reset 

message is waiting to be sent. This message will appear at the receiving station as “E339 803”. The 

description may read “Trouble – Exp. Mod. Reset”. If registration is not validated within 90 seconds, 

the GSMVLP4G/GSMVLPCN4G times out, and the (green) LED will be lit (solid). 

Register Using the Programming Tool 

The interactive registration feature allows the installer to register the GSMVLP4G through a series of 

keyboard commands on the 7720P Programming Tool.  This method of registration lets the installer 

monitor the registration process. 

 

Registering … 

 

Once the installation is complete, press the 

[

↑

]

 key on the 7720P.  The 

registration message is sent and the unit waits for the acknowledgment. 

 

Registration 
SUCCESS

 

If this is a new installation and the city, central station, and customer numbers 

have been correctly entered, the GSMVLP4G is registered and this message is 

displayed. The GSMVLP4G is now in full service and available for alarm 

reporting to the central station. 

Possible Errors 

 

 

Registration BAD 
Timed Out

 

Displayed if no response to the registration request is received. 

 

Registration BAD 
Pri Sub ID BAD

  

Indicates the city, central station, or customer number for the labeled 

account(s) is not accepted.  The ID information was either entered in error, or 

the central station failed to pre-authorize programmed ID numbers with 

AlarmNet customer service. 

Содержание GSMVLP4G

























Отзывы:

Нет отзывов