Map Galaxy panel events to Security Center actions
gtap.genetec.com | Honeywell Galaxy Control Panel Integration Guide 5.2
35
EN.550.007-V5.2.C4(3) | Last updated: March 11, 2014
8
In the
Action
page, select an action, and enter any additional information required about the
action.
EXAMPLE
If you select the
Trigger output
action, you must select the output pin to trigger,
and its output behavior.
9
Click
Next
10
On the
Creation summary
page, do the following:
a
Verify the information.
b
If everything is correct, click
Create
, or click
Back
to modify the settings.
After the event-to-action is created, the following message appears:
The Operation was
successful
.
11
Click
OK
.
