Honeywell FUSION III DVR, Руководство пользователя

Страница: 8 / 168

OPTICAL AND ACOUSTICAL STATEMENTS
VISIBLE LED STATEMENT
The LEDs on this DVR unit are classified as “Class 1 LED Product” in accordance with EN 60825-1.
LASER SAFETY STATEMENT FOR A CLASS 1 LASER PRODUCT
This CD-ROM Storage device has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and if not installed and used
in accordance with the instruction manual may cause harmful interference. If this equipment does
cause harmful interference to radio or television reception, the user is can attempt to correct this by
following one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment into an outlet on a circuit different from that which the receiver is
connected.
•
Consult the dealer or an experienced radio TV technician for help.
The mass storage system does not product hazardous laser radiation. Because laser light emitted
inside the mass storage system is completely confined within the protective housings and external
covers, the laser beam cannot escape from the machine during any phase of user operation.
CAUTION:
Due to the extremely fast rotation speed of the CD-ROM
drive spindle motor (9000 ~ 12000 rpm), the drive’s performance could
be affected by using substandard discs. These substandard discs may
be damaged, or damage the CD-ROM drive.
•
Check each CD for cracks before using it. If there are cracks on the surface, especially on the
border of the center hole, do not use it in the CD-ROM drive. Using such CDs can cause
irreparable damage to the CD-ROM drive.
•
Do not leave CDs in direct sunlight or hot, humid locations.
•
Always remove CDs from the drive after use.
•
To protect CDs from scratches, never touch the CD face or place the CD face down on a hard
surface.
•
Do not affix highly adhesive stickers to a CD.
VISIBLE LED STATEMENT
Lpa < 70 dB operator position, normal operation, per ISO 7779.