Honeywell FUSION III DVR, Руководство пользователя

Страница: 73 / 168

SETUP OPTIONS
5–29
5 Image Port
The Image Port is the port used to transfer the video
to the Fusion Remote Software. If connecting through
a firewall, this port must be opened to incoming and
outgoing traffic.
6 Search Port
The Search Port is the port used to transfer the
Search information to the Fusion Remote Software. If
connecting through a firewall, this port must be
opened to incoming and outgoing traffic.
7 Web Function
Enables the use of the Web DVR interface as well as
defines users who can access it.
8 Enable Web Viewer
This is the Port that is used by the DVR to transmit
images through the Internet.
9 Internet Port
Allows FVMS to receive information regarding the
health of the DVR.
10 Enable Health
Check
Sets the port DVR Health information is transmitted
over. This port must match the port set in FVMS.
11 Quality
Adjusts the resolution quality when transferring video
to a remote client.
12 Resolution
Adjusts the resolution of the images being sent to
remote clients. By setting the resolution low, the
images will be sent faster, however, the image quality
will be reduced considerably. When set to Original, full
quality video will be sent (720 x 480) however this is
very bandwidth intensive.
13 Transport Rate
Throttles the bandwidth on the DVR. This option is
based on percentages of images sent.
14 View IP Address
Allows viewing of the IP configuration of the DVR.
15 PPP Setup
(Emergency)
Defines the modem and PPP information to dial to a
remote client when an Alarm Monitor Event is
activated.
16 Enable Audio
Communication
Allows one way audio communication from a remote
client to the DVR.
17 Upgrade Port
Allows communication from a remote client to the
DVR, allowing upgrades through the specified port.
18 Use Keyboard
Control
Allows use of an RS232 Keyboard