Honeywell FUSION III DVR, Руководство пользователя

Страница: 136 / 168

FUSION III DVR Digital Recording and Transmission System
9–2
9.2.1 CONFIGURING TCP/IP SETTINGS
1. Exit and restart in Windows mode.
2. Right-click on the
My Network Places
icon located on the desktop and select
Properties
. The Network and Dial-Up Connections window opens.
3. Right-click
Local Area Connections
and select
Properties
.
The Local Area Connection Properties window opens.
4. Select the
Internet Protocol (TCP/IP)
by clicking on it once. Once it is highlighted,
select the
Properties
button. The Internet Protocol (TCP/IP) Properties window
opens.
5. Select
Use the Following IP Address
option. Enter the IP Address and Subnet
mask appropriate for your network. It is recommended to contact your Network
Administrator for appropriate IP settings.
Example: Common IP addresses are 10.0.0.25
Common Subnet masks are 255.255.255.0
NOTE:
In order to connect to the DVR unit through a remote LAN connection, a static
IP address must be assigned. If the network assigns the IP address
automatically (DHCP), contact the Network Administrator for help assigning a
static IP address.
6. If the network requires specifying your DNS information, enter it now by selecting
the appropriate DNS options.
7. When finished configuring the TCP/IP settings close the
Internet Protocol
(TCP/IP) Properties
window by clicking the
OK
button.1
8. Close the
Local Area Connection Properties
window by clicking the
OK
button.
9. It may be required to restart Windows for the changes to take effect.
Restart windows by selecting START on the desktop and selecting Restart.
9.2.2 CONNECTING THE DVR TO A LAN
Using a standard RJ-45 cable, plug one end into a Hub (or Network Jack ultimately
connected to a hub) and the other end into the DVR unit.