Honeywell FUSION III DVR, Руководство пользователя

Страница: 54 / 168

FUSION III DVR Digital Recording and Transmission System
5–10
5.4.4 VIDEO LOSS ALARM
The DVR supports a Video Loss Alarm function which allows an Alarm Event to occur
when a camera loses its signal. The lost signal can be due to Power failure to the
camera, the camera cable being cut or unplugged, or the camera being damaged in
some way.
In order to use Video Signal Loss detection, cameras must either be ENABLED or
DISABLED. This is because the DVR needs to know which cameras it should expect to
receive signals from. To ENABLE camera(s), open
Frame Setup
, and set the Frames
Per Second to anything above zero. By designating zero frames per second the
camera will not be used by the DVR.
1 Activate
Audio Alarm
(BEEP)
When video loss occurs, an
internal speaker on the DVR
will sound an alarm.
2 Video Loss
Alarm Log
When video loss occurs, the
event is recorded in the DVR
log.
3 Activate
Alarm Output
Activates the last Relay
Output on the DVR when
camera loses signal. (This is
#16 for a 16/32 ch DVR and
#8 for an 8ch DVR)
2
1
3