Honeywell FUSION III DVR, Руководство пользователя

Страница: 49 / 168

SETUP OPTIONS
5–5
7 Full Screen Pop-Up
When motion is detected, the camera is displayed full
screen.
8 Clear Motion Area
Clears all motion areas for the selected camera.
9 Post Alarm
(MOTION)
Record video after motion has stopped for a specified
period of time. This option will only work for camera
set to record using motion detection.
10 Post Alarm
(SENSOR)
Record video after a sensor event has ceased for a
specific period of time. This option will only work for
cameras set to record from a sensor.
11 Draw Full Motion
Area
This option allows you to draw a full motion area over
the whole camera screen that is selected.
12 Apply to all
channels
Applies the current motion settings to all camera
channels.
13 Regular Interval
Recording
Allows you to specify a regular interval, in which the
specified channel will record.
5.3.1 CREATING A MOTION AREA
10.
Place the mouse pointer at the upper
left hand corner of the designated
area, press and hold down the left
mouse button, drag the mouse. Let go
of the button when the Motion Area is
of the desired size.
11.
Continue creating as many Motion
Areas as desired (up to 5).
Resize and move motion areas by
dragging the sides and corners of the
Motion Area window.
5.3.2 REMOVING A MOTION AREA
1.
To remove the motion areas, press .