Honeywell FF-SYA14 Series Скачать руководство пользователя страница 63

Страница: 63 / 70

107031-33-EN FR26 GLO 1101 Printed in France

FF-SYA SERIES LIGHT CURTAIN FRONT PLATE AND FINISH DAMAGE

Gently wipe soiled areas with soft, clean, non-abrasive cloth. To prevent scratching clear plastic front plate or finish, do
NOT rub hard.

Failure to comply with these instructions may result in product damage.

5.4.2

Using Soap and Water

Turn off and disconnect power to the light curtain and machine.

Dampen a soft, clean, non-abrasive cloth in the solution of mild soap and water. Squeeze excess solution from the
cloth.

Wipe the soiled areas gently with the damp cloth. Do not rub hard to prevent scratching the clear plastic front plate
or paint finish.

Rinse the cloth in clean water and gently wipe off any excess soap.

Dry the emitter and receiver with a soft, dry, non-abrasive cloth. Ensure there is no moisture left on the emitter and
receiver units before power is applied.

Connect power to the machine and light curtain.

Perform the operational test to ensure proper functional readiness.

5.4.3

Cleaning the Mirrors

MIRROR DAMAGE

Use soft, clean, non-abrasive cloth to clean dust or dirt from mirror to prevent scratching surface.

Failure to comply with these instructions may result in product damage.

Dampen a soft, clean, non-abrasive cloth with 90 % alcohol or white spirit.

Wipe the face of the mirror gently with the damp cloth. Do not rub hard to prevent scratching the finish.

Dry the mirror with a soft, dry, non-abrasive cloth. Ensure there is no moisture or lint left on the mirrors.

Perform the operational test to ensure proper functional readiness.

Содержание FF-SYA14 Series







































































Результаты поиска

Содержание FF-SYA14 Series

Отзывы:

Похожие инструкции для FF-SYA14 Series

Бренды по названию

Популярные бренды

Honeywell FF-SYA14 Series, Руководство пользователя

Результаты поиска

Содержание FF-SYA14 Series

Отзывы:

Похожие инструкции для FF-SYA14 Series

Бренды по названию

Популярные бренды