manualshive.com logo in svg

Honeywell Dolphin 70e Black, Руководство пользователя

Поделиться
Скачать
Honeywell Dolphin 70e Black Скачать руководство пользователя страница 175

15 - 5

Bottom Panel

For details on how to mount the base, see 

Mounting the Net Base

 on page 

15-7.

Power

The terminal requires 12 Volts DC input for battery charging and power output to the terminal. The power 
adapter included with the base, converts the voltage from the AC power source to 12 volts DC. 

Use only 

a UL Listed power supply, which has been qualified by Honeywell with output rated at 12VDC and 
5 amps with the device.

 The operating temperature range is -10° to 50°C (14° to 122°F).

Honeywell recommends that you leave the Net Base connected to its power source at all times, so that it 
is always ready to use. 

We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell 
peripherals, cables, or power adapters may cause damage not covered by the warranty.

Connecting Power to the Net Base

1.

Plug the A/C power cord into the power 
adapter.

2.

Plug the power cable into the power 
connector on the back of the base.

3.

Plug the A/C power cord into a 
grounded power source.

4.

The base is ready to begin charging 
terminals.

Charging the Main Battery

The base provides power to the Dolphin terminals and allows charging of the batteries in the terminals. 
The battery of each terminal charges in 4 hours for the standard battery or 6 hours for the extended 
battery. The intelligent battery charging system incorporated into all Dolphin terminals prevents 
overcharging, which means that Dolphin terminals may be stored in the base indefinitely without damage 
to the terminals, battery packs, or the base.

For more information about Honeywell battery packs and how to check battery power levels in your 
terminal, refer to 

Power

 (page 6-27) and 

Battery

 (page 3-12).

Serial Number Label

Compliance Label

MAC Address Label

!

Power 
Connector 
Cable

A/C Power 
Cord

Power Adapter

Power LED

Содержание Dolphin 70e Black

























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды