Honeywell Dolphin 70e Black, Руководство пользователя

Страница: 46 / 184

3 - 10
Image Engine Window
The image engine reads and decodes linear, stacked linear (e.g., PDF417), and 2D matrix bar
code symbologies. The LED aperture for the imaging engine’s LED aimer is contained behind
this window. For more details, see
Using the Scan Image Engine on page 4-1.
Left Scan/Image Button
By default, the left button triggers the scanner/imager. You can reassign the button to launch
applications or execute commands. For additional information, see
Changing Button
Assignments on page 6-5.
Memory Card Socket
The memory card socket provides the user with the option to expand the terminal’s memory
capacity using microSD or microSDHC memory interfaces. The expansion socket is located
under the battery door and battery.
Note: Honeywell recommends the use of Single Level Cell (SLC) industrial grade microSD or
microSDHC memory cards with Dolphin terminals for maximum performance and durability.
Contact a Honeywell sales representative for additional information on qualified memory card
options.
When the battery door and battery pack are properly installed, the card is sealed against
moisture and particle intrusion, read/write data is stored securely, and the terminal’s
environmental rating is preserved; see
Installing a SIM Card and/or Memory Card on page 3-
17.
Memory Card Retention Flap
The memory card retention flap locks the memory card in the socket; see Installing a SIM Card
and/or Memory Card on page 3-17.
Power Button
The Power button located on the top of the terminal initiates multiple functions depending on
the length of time the button is pressed.
• A quick press of the button toggles Suspend Mode On or Off.
• Press and hold the button down for approximately 4 seconds to access the options menu for
a Hard Reset , a Soft Reset , entering Suspend mode, or to Power Off the terminal.
• Press and hold the button down for approximately 8 seconds to initiate a manual Hard Reset
if the touch screen has stopped responding.
SIM Card Socket
The card socket for the Subscriber Identity Module (SIM) is located under the battery door and
main battery. When the battery door and battery are properly installed, the card is sealed
against moisture and particle intrusion, read/write data is stored securely, and the terminal’s
environmental rating is preserved; see
Installing a SIM Card and/or Memory Card on page 3-
17.
SIM Card Retention Flap
The SIM card retention flap locks the SIM card in the socket; see Installing a SIM Card and/or
Memory Card on page 3-17.
Volume Control Button
Press the top or bottom of the volume button to raise or lower the volume of the active speaker.
Lower the volume all the way down to enable vibration mode.